Схема asus vw224s

схема asus vw224s
Cost for attachment in this forum is 10 Points. Audio Board Connect AUDIO CABLE and KEY CABLE. Assemble AUDIO BOARD. Thread the AUDIO CABLE through the hole and secure 1 screw. This section describes the procedures for LCD monitor disassembly. In addition, the detailed disassembly procedures of individual subsystem will be provided for your service needs. Page 40: Suggest Tools Service Manual ASUS VW224U&VW224S 7.2 Suggest Tools Here are some tools that can be used for the LCD monitor’s service and repair. Stand Subsystem Install the HINGE, Mount 3 screws. Remove SPEAKERS. 7.3.3 Bezel Subsysytem Dismount KEY PAD. Note:The disassembly way of VW224S is the the same as the VW224H’s. Page 51: Assembly Procedure Information in this section is to perform the assembly procedure of the LCD monitor. ASUS VW224U LCD monitor consists of various subsystems.


This section describes the procedures for LCD monitor assembly. In addition, the detailed assembly procedures of individual modules will be provided for your service needs. Make sure all power connection is removed. Be sure that the LCD Monitor is in power off status. Remove the MAIN SHIELDING away from the LCD PANEL. Page 47 Service Manual ASUS VW224U&VW224S Audio Board Release 2 screws on AUDIO BOARD。 Remove AUDIO BOARD Disconnect AUDIO CABLE and KEY CABLE… Page 48 Service Manual ASUS VW224U&VW224S Main Borad Release 4 screws. Page 78 Service Manual ASUS VW224U&VW224S 11.3 Key Board OSD is unstable or not working Is Key Pad Board connecting normally? Page 54 Service Manual ASUS VW224U&VW224S Secure 5 srcews. The other control buttons are located at the front of the panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences.

Mount BASE under STAND. Note:The assembly way of VW224S is the the same as the VW224H’s. Page 59: Isp Instruction Service Manual ASUS VW224U&VW224S 8. ISP Instruction 8.1 The tool for ISP An i486 (or above) personal computer or compatible. Button: • Press this button to increase the value of the function selected or move to the previous fuction. • This is also a hotkey for Brightness adjustment. Page 5: Monitor Specification Service Manual ASUS VW224U&VW224S 1. Monitor Specifications… Page 6: Operation Instruction, General Instructions, Control Button Service Manual ASUS VW224U&VW224S 2. Operation Instruction 2.1 General Instructions Press the power button to turn the monitor on or off. Philips-head Screwdirver Use a Philips-head screwdriver to fasten/remove the K- or B-typed screws P/N:N/A Gloves To protect LCD Panel and your hand… Page 41 Information in this section is to perform the disassembly procedure of the LCD monitor. Replace X401 Check Q411 and Q412 are Check reset circuit of broken or CN407 solder? U401 is normal Check Correspondent Check Correspondent component.

Похожие записи: